Dynavector DV 507 MkII tonearm


Availability: In stock

Levertijd 1-2 dagen

DV 507 ToonarmEen toonarm heeft 2 belangrijke..

Heeft u een vraag over dit product?

026 84 878 47info@tweaks4u.comLivechat: online


The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507
which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984.
As it is a bi-axis inertia controlled tonearm the DV 507, no matter the type of cartridge can trace the music signal grooves
cut in the recording with extreme accuracy. The DV 507 also provides superb trackability on warped recordings.
Resolution and musical detailing are quite remarkable.

A tone arm is required to operate in two important ways so as to ensure that the cartridge can reproduce faithfully the signal from the record groove.
First, there is the need to support the cartridge so that the transfer of the cantilever motion accurately mirrors the audio signal.
Secondly, it must maintain an excellent tracking ability for warped records since few records are perfectly flat.
These requirements can conflict with each other. However, the bi-axis tonearm provides an effective solution to the problem.

Main features:
- Electro Magnetic Damping System for accurate tracking
- Arm Lift provided
- Easy Height Adjustment
- Dynamic Balance Tracking Force Adjuster
- Dynamic Damper installed in sub arm


Type: Bi-Axus inertia controlled Dynamic and Eddy Current Damping Dynamic Balance type tone arm
Overal length: 306 mm. With head shell: max 326 mm
Effective length: 241 mm (i.e. tonearm pivot point to cartridge stylus point)
Overhang: 15mm
Offset Angle:  21.5 degree
Height: 59 mm lifts up to 92 mm
Height adjustment range: 39 mm-72 mm at sub arm center
Depth:  36 mm without connecting cable
Optimum Cartridge weight: 15-35 grams, including headshell
Horizontal Tracking Error:  -1.1 degree - +2.2 degree, 0 degree at inner band of record, 2.2 degree at outside
Tracking Force range: 0-38 grams by 0.2 grams step
Sensitivity:  Horizontal: less than 50 mgrams, Vertical: less than 40 mgrams
Net weight: 1380 grams
Output connection: 5P connector
Headshell connection: EIA standards 4 Pin connector
Accessory: - low resistance (0.046 ohms/m, 54pF/m) high quality arm cable
- milled aluminium headshell weight 15.4 grams
- mounting template for the arm
- overhang gauge for the headshell


Please wait...