Audioengine A5+, active loudspeakers
Custom BuiltAudioengine designs and manufactures our own tweeters, woofers, and many other critical components. In other words, these are not "box built" speakers with off-the-shelf parts but entirely custom-designed to our specifications. What we do not fabricate directly in our factory we have custom-made to our designs (parts such as toroidal transformers, magnets, and wiring harnesses, for example). The cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than AV stereo receivers and passive speakers.
Based on Studio Monitor DesignsStudio monitor speakers are used by producers and engineers in recording and production studios. They are designed with a theoretical flat frequency response which allows the engineer to create a final mix in such a way that the recorded music will sound good on most other speakers. Although Audioengine speakers are not designed to be up-close "nearfield" studio monitors, we do carry over much of the same higher-end technology, components, and design philosophy for Audioengine speakers.
DriversAudioengine uses audiophile quality, ferro fluid cooled, silk dome tweeters with Neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are Kevlar woven glass aramid composite with rubber surrounds. Kevlar is obviously very strong, which means that the woofer retains its shape when being driven at high levels. The speaker materials and construction are robust enough to stand up to some serious thrashing, so speaker grills aren’t needed. In other words, we did our homework on the speaker drivers and they will sound and look great after many years of use.
CabinetsTo minimize unwanted resonances and distortion, Audioengine cabinets have thick high-resin MDF walls with extensive internal bracing. Heavy internal sound-damping material is used to reduce unwanted sound reflections inside the cabinet. All cabinet edges are rounded which look great and reduce high-frequency diffraction effects on the front baffles. Each cabinet contains tuned, front-port slots. Both speakers are tuned and tested together and sold in pairs.
Power AmplifierThe amplifiers in Audioengine speakers are located in the left speaker and are a very conservatively rated all-analog design. All components are tuned together for each model, which provides a much more efficient system requiring less power than passive speakers and separate amplifiers. Circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection (a good thing).
Both drivers are directly video shielded and allow the user to place the speakers within a few inches of a video monitor. This shielding also offers pro
2.0 powered (active) multimedia desktop speaker system
60W peak power total (15W RMS / 30W peak per channel), AES
Dual 1/8" stereo mini-jack and RCA jacks
100-240V, 50/60Hz auto-switching
Dual Class AB monolithic
>95dB (typical A-weighted)
<0.05% at all power settings
10K ohms unbalanced Protection
Output current limiting, thermal over-temperature, power on/off transient protection
6”(H) x 4”(W) x 5.25”(D)
Weight (LEFT speaker)
Weight (RIGHT speaker)
4.6kg/10lbs per pair
Shipping box dims
10.5” (H) x 15” (L) x 7” (W)
Materials and Construction
18mm thick MDF cabinets
20mm silk dome tweeters with neodymium magnets
2.75" Kevlar woofers with advanced voice coils
Power supply with detachable AC power cable
Speaker cable (16AWG), 2 meters (~6.5 feet)
1/8” mini-jack audio cable, 2 meters (~6.5 feet)
1/8” mini-jack audio cable, 20cm (~8 inches)
Drawstring power supply bag
Drawstring cable bag
Drawstring speaker bags (2)
Product line brochure
tection for hard-drive digital music players.